Mark Levinson No. 585 Integrated Amplifier

Mark Levinson No. 585 Integrated Amplifier

Up for sale is a must mint like new ML #585 with low hours. This unit has zero blemishes, remote still has plastic

on it. Comes with all original accessories and packaging.

Output Power: 200W RMS per channel @ 8 O, 20Hz – 20kHz

Damping Factor: >400 @ 20Hz, referred to 8 O

Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB

Signal-to-Noise Ratio: >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output –

maximum volume setting

Voltage Gain: 40.7dB (maximum volume setting)

Total Harmonic Distortion: <0.01% @ 1kHz, 200W, 8 O; <0.1% @ 20kHz, 200W, 8 O

PREAMPLIFIER SECTION: ANALOG

Input Impedance: >45k O (RCA & XLR)

Input Overload: >5.5V RMS (RCA & XLR)

PREAMPLIFIER SECTION: DIGITAL

Sample Rates/Bit Depth: PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD: Native,

single- and double-speed

GENERAL

Analog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line

outputs (RCA); 1 pair loudspeaker outputs (“Hurricane” binding posts w/banana sockets that accept spade lugs with

1/4″ (6.3mm) spacing up to 1/8″ (3mm) thick)

Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-

Link); 1 asynchronous USB input (USB-B)

Control Connectors: 1 RS-232 port (RJ-12 connector); 1 IR input (1/8″ phone jack); 1 programmable 12V DC trigger

output (1/8″ phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8″ phone jack); 1 Ethernet port

(RJ-45 connector)

Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set)

Power Consumption: Maximum 1000W (power on)

Unit Dimensions (H x W x D): 6.9″ (175mm) – without feet; 7.59″ (193mm) – with feet x 17.25″ (438mm) x 19.95″

(507mm)

Packaging Dimensions (H x W x D): 19″ (483mm) x 26″ (660mm) x 26″ (660mm)

Weight: 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging