ID : 30784
Attention.
Do you have a Tattoo Removal laser or IPL MACHINE from China?
Has your Tattoo Removal Laser Started To Lose Power?
Don`t Pay Over The Odds. For A New One, Or An Expensive Repair.
All you need is to replace the laser lamp inside the handle.
Most repair shops or fitters charge over the odds for a replacement
Laser Lamp for Tattoo Removal or Hair Removal Laser or IPL Machines.
This is because the real Medical Grade Laser Lamps are really expensive and the ones you usually get in a machine is a factory sample lamp that has just enough power to do a few good jobs, and then you need to buy a new Laser Lamp from them.
2 or 3 Laser Lamps can cost as much as a new Hair / Tattoo Removal Laser Machine. And if You will need 3 or 4 lamps a year. This can be very expensive, that`s why the sessions cost so much.
The Fitter has to de-solder the OLD Lamp by stripping down the Laser handpiece, and carefully removing the expired lamp bulb, then replacing the brand new lamp and then soldering it in. an expert can take 30 minutes. a novice maybe 90 minutes.
HERE IS WHAT YOU ARE BUYING GUYS.
1) A Brand NEW Factory Sealed Genuine ND YAG Q Switch Laser Replacement Lamp. RRP:£99
2) My FREE GIFT TO YOU… Solderless Q Factor Laser Clamps RRP:£40.00
3) FREE SHIPPING. NO CHARGE. to UK Excluding Ireland.
No Need to use a soldering iron ever again or PAY over the odds for fitting.
A) Simply snip out the old Laser lamp wires with scissors or pinchers.
B) Pull the old Laser lamp out.
C) Push through this new Laser Lamp.
D)Tighten the Q Factor Clamp Screws; finger tight each end of the Laser Lamp
E) Use a Screw Driver for the final quarter of a turn.
JOB DONE.
This now Takes just under 5 minutes at no cost for expensive fitters or engineers ever again. just fit my lamps.
The Lamps Were £140.00.alone. Now just £99.
Shipping was £5.00
Here is the lot for just
£99.00
FREE POST To UK ONLY>
I will need to know what size lamp you want as they vary in size.
I have 4 lamps left and 4 pairs of clamps.
Buy now to avoid disappointment.